Fabricator

Kigali, Gasabo, Rwanda
Full Time
Entry Level

1. About GOGO Electric

Bodawerk International Limited, trading as GOGO Electric, is an electric mobility company transforming the transportation industry through the assembly of electric motorcycles and lithium-ion batteries.

Through our Battery-as-a-Service (BaaS) model, we provide an affordable and sustainable transport solution for boda boda riders, helping them save money on fuel and maintenance while contributing to a cleaner environment.

With over 5,000 electric motorcycles on the road and more than 200 swap stations in operation, we are expanding access to electric mobility. Our goal is to increase our customers' earnings by reducing their operating costs while creating opportunities for a cleaner and more sustainable future.

As we expand our operations into Rwanda, we are looking for skilled and motivated individuals to join our team and contribute to building the future of electric mobility.

2. Job Purpose

The Fabrication and Welding Technician is responsible for fabricating, welding, fitting and finishing metal components used in electric motorcycle production and battery charging infrastructure. The role includes fabricating battery cases and receivers, welding motorcycle frames, preparing and installing conversion kit components such as mounting brackets and footrests, and fabricating shelves and racks for battery charging points.

The technician must ensure that all fabricated components meet the required measurements, specifications, quality standards and safety requirements.

3. Key Responsibilities

3.1 Battery Case and Receiver Fabrication

  • Fabricate battery cases and battery receivers according to approved drawings, measurements and specifications.
  • Cut, bend, shape and fit metal materials to the required dimensions.
  • Carry out spot welding and full welding of battery cases and receivers as required.
  • Check completed components for correct measurements, strong welds and proper finishing.
  • Correct fabrication defects before submitting components for inspection or assembly.

3.2 Motorcycle Frame Welding and Fabrication

  • Weld and fabricate electric motorcycle frames according to approved drawings and specifications.
  • Cut, shape, align and join frame components to achieve the required dimensions and structural strength.
  • Use welding jigs and fixtures to maintain correct frame alignment and consistency.
  • Weld frame joints, supports and mounting points as required.
  • Inspect completed frames for cracks, weak welds, gaps, misalignment and other defects.
  • Correct identified defects before handing over frames for assembly.

3.3 Conversion Kit Fabrication and Installation

  • Fabricate metal mounts, brackets and other components required for motorcycle conversion kits.
  • Prepare motorcycle frames for the installation of conversion kit components.
  • Install and weld specified conversion kit components, including mounting brackets and footrests, onto motorcycle frames.
  • Ensure that installed components are correctly positioned, aligned and securely attached.
  • Check completed installations against approved measurements and specifications.

3.4 Battery Charging Point Shelving and Metal Fabrication

  • Fabricate metal shelves, racks and storage structures used at battery charging points according to approved designs and measurements.
  • Cut, bend, weld and assemble metal components to produce strong and stable structures.
  • Follow approved designs and load specifications when fabricating battery storage racks and support structures.
  • Carry out repairs and modifications to existing shelves, racks and other metal structures where required.
  • Confirm fabrication requirements, measurements and quantities with the relevant teams before starting work.

3.5 Grinding, Polishing and Finishing

  • Grind and polish fabricated motorcycle frames, battery cases, receivers, shelves, racks and other metal components.
  • Remove excess weld material, sharp edges and rough surfaces.
  • Prepare fabricated components for painting, installation or assembly.
  • Ensure finished components are neat, properly aligned and free from visible fabrication defects.

3.6 Quality Control and Production Records

  • Follow approved technical drawings, work instructions and production quality standards.
  • Check own work before submitting components for quality inspection.
  • Verify measurements, weld quality, alignment and component fitment.
  • Identify and separate defective components and report them to the supervisor.
  • Record completed work, defects and corrective actions as required.
  • Report recurring fabrication problems and recommend improvements.

3.7 Equipment and Tools Maintenance

  • Operate welding machines, grinders, cutting equipment, drills and other fabrication tools.
  • Carry out routine checks and basic maintenance of workshop equipment.
  • Keep tools and equipment clean, organised and in good working condition.
  • Report damaged tools, equipment faults and maintenance requirements.
  • Use fabrication materials and welding consumables responsibly to minimise wastage.

3.8 Teamwork and Production Improvement

  • Work closely with Production, Assembly, and Quality teams to meet production schedules.
  • Complete assigned fabrication work within agreed timelines.
  • Support the fabrication of sample components and implementation of approved design changes.
  • Provide feedback on ways to improve welding quality, reduce material wastage and increase production efficiency.
  • Act on feedback from supervisors and the Quality team.

4. Health and Safety Responsibilities

  • Follow company health and safety policies and applicable workplace safety requirements in Rwanda.
  • Wear appropriate personal protective equipment (PPE), including welding helmets, gloves, safety boots and protective clothing.
  • Operate welding machines, grinders and cutting equipment safely and in accordance with operating instructions.
  • Ensure adequate ventilation when welding or grinding to minimise exposure to fumes and dust.
  • Follow fire prevention procedures and hot-work safety requirements.
  • Handle and store welding materials, gases and workshop supplies safely.
  • Keep the work area clean and free from metal offcuts, loose cables and other hazards.
  • Apply safe lifting and material-handling practices.
  • Report unsafe conditions, damaged equipment, injuries and near misses to the supervisor.
  • Know the workshop emergency procedures, evacuation routes and locations of fire extinguishers.

5. Skills and Competencies

Technical Skills

  • Practical welding skills using relevant methods such as MIG, TIG or arc welding.
  • Ability to cut, bend, shape, grind and join metal materials.
  • Ability to read and interpret technical drawings, measurements and fabrication instructions.
  • Competence in using measuring tools to verify dimensions and alignment.
  • Knowledge of motorcycle frame fabrication and structural metalwork.
  • Ability to fabricate and install brackets, mounts, footrests, shelves and metal racks.
  • Ability to identify poor welds, fabrication defects and alignment problems.
  • Ability to operate and carry out basic maintenance of fabrication equipment.

Personal Competencies

  • Attention to detail and commitment to quality workmanship.
  • Good hand-eye coordination and practical problem-solving skills.
  • Ability to organise work and meet production deadlines.
  • Ability to follow technical instructions and communicate clearly.
  • Willingness to learn and act on feedback.
  • Ability to work independently and as part of a team.
  • Strong commitment to workplace safety.

6. Qualifications and Experience

Education

  • Certificate or TVET qualification in Welding and Metal Fabrication, Mechanical Engineering or a related technical field.
  • A Diploma in Mechanical Engineering, Welding Technology or a related field is an added advantage.

Experience

  • At least 2–3 years of practical experience in welding, metal fabrication or a manufacturing environment.
  • Experience in motorcycle frame fabrication, automotive manufacturing or electric vehicle production is an added advantage.
  • Practical experience in cutting, welding, grinding, measuring and fitting metal components.
  • Experience using welding jigs, fixtures and technical drawings is an advantage.

Professional Certification

  • Recognised welding certification, such as AWS or an equivalent qualification, is an added advantage.
  • Candidates should be able to demonstrate practical welding and fabrication skills during the recruitment assessment.

Language

  • Working knowledge of Kinyarwanda.
  • Ability to understand basic English work instructions is required; proficiency in English is an added advantage.

7. Performance Expectations

Performance will be assessed against agreed production requirements, including:

  • Meeting assigned daily and weekly fabrication targets.
  • Producing components that meet approved measurements and quality specifications.
  • Achieving acceptable weld quality and passing quality inspections.
  • Minimising fabrication defects, rework and material wastage.
  • Correctly fabricating and installing motorcycle conversion kit components.
  • Completing shelves, racks and other metal structures according to approved specifications.
  • Maintaining tools and equipment in good working condition.
  • Following safety procedures and keeping the work area organised.

Equal Opportunity and Non-Discrimination

GOGO Electric is an equal opportunity employer. We welcome applications from all qualified candidates and do not discriminate on the basis of gender, age, disability, religion, ethnicity or any other status protected by applicable law.

Recruitment and employment decisions are based on skills, qualifications, experience and suitability for the role.

Share

Apply for this position

Required*
We've received your resume. Click here to update it.
Attach resume as .pdf, .doc, .docx, .odt, .txt, or .rtf (limit 5MB) or Paste resume

Paste your resume here or Attach resume file

Human Check*